Home xin What’s wrong with the vacuum packaging machine not pumping

What’s wrong with the vacuum packaging machine not pumping

by admin
0 comment

What’s wrong with the vacuum packaging machine not pumping

1. The vacuum pump of the packaging machine does not act

the travel switch is not pressed. Please close the machine cover. You can adjust the travel switch by adjusting the screw position or adjusting the pressure bar. For the electric cover opening model, please adjust the pull rod

if it is a relay control panel, the vacuum pump time relay may be damaged; If it is controlled by the computer version, it means that the computer version is faulty. Please replace it. The vacuum pump motor is damaged. Generally, in this case, the manufacturer will provide warranty (of course, it is a regular manufacturer) and replace or repair it

2. The vacuum chamber of the vacuum packaging machine cannot reach the vacuum degree

reason 1: the vacuum pump is worn or damaged and cannot reach the vacuum degree

reason 2: loose gas pipe connector, broken pipe, damaged vacuum chamber sealing ring, damaged solenoid valve, etc., resulting in the atmosphere channeling into the vacuum chamber

reason 3: the vacuum pump oil is insufficient

reason 4: insufficient gas time

3. The vacuum chamber of the vacuum packaging machine cannot be opened

the vent solenoid valve fails to open after the working cycle. For fully automatic equipment, such as the electric cover opening model of rolling vacuum packaging machine, the cover opening motor may be damaged and the pull rod may be stuck

4. The residual air in the vacuum packaging product bag

the sealing strip is not reset well, resulting in the crushing of the bag mouth when the vacuum packaging machine exhausts air, resulting in early sealing and failure to extract the air in the bag. The sealing strip of the packaging machine is not flexible, which presses the bag mouth to death, resulting in the failure of air extraction

5. Abnormal noise during operation, tripping, black smoke from the exhaust port and oil dripping

possible causes of failure are:

I: the motor fan of the pump makes abnormal noise and needs to be repaired

II: the air inlet is blocked and there is foreign matter in the pump

III: the vacuum pump oil is insufficient or caused by the use of non-standard engine oil

IV: the pump is overheated due to long-term operation, or due to operation at high temperature, please keep the machine ventilated and radiating

the vacuum packaging machine can automatically extract the air in the packaging bag and complete the sealing process after reaching the predetermined vacuum degree. Nitrogen or other mixed gases can also be filled, and then the sealing process can be completed. Vacuum packaging machine is often used in the food industry, because after vacuum packaging, food can resist oxidation, so as to achieve the purpose of long-term preservation

go to Baidu app to view
Answer

 Hello, dear  I'm Mr. Zhang who has been teaching for 10 years. I graduated from South China Normal University. I'm a general educator in the field of education. I have rich experience in all aspects. I hope my experience can really help you

 your teacher has seen your question and is organizing the answers. Please wait patiently and reply to you immediately! 

 III. maintenance and repair of mechanical equipment. After the mechanical equipment is bought and used for a period of time, it must be maintained regularly, just like the car. If the maintenance is not in place, the best equipment cannot be used for a long time

1 more
> is blocked. change a new one.

I don’t know..

You may also like

Leave a Comment