Home xin How to operate the powder packing machine

How to operate the powder packing machine

by admin
0 comment

the powder in the silo enters the shell of the discharge hopper of the packaging machine. While inserting the bag manually, start the travel switch to transmit the signal to the microcomputer, start the solenoid valve, work through the cylinder, open the discharge nozzle, and the powder is continuously filled into the woven bag through the discharge nozzle by the high-speed impeller. When the bag weight reaches the set amount, the sensor transmits the signal to the microcomputer, the solenoid valve moves the microcomputer control to start the cylinder, close the discharge nozzle and stop filling; At the same time, the bag press is sucked in by the signal of the sensor, and the bag press is released to tilt the woven bag and drop the bag. The whole filling process is electrically controlled. In addition to manual bag insertion, the bag press and discharge nozzle are opened and closed; Powder filling, weighing and bag dropping can be completed automatically
if you have any questions, please contact: Xu Rui, Ruiteng powder packaging equipment Co., Ltd

there are many kinds of powder packaging machines: automatic valve mouth packaging machine, simple valve mouth packaging machine, automatic open packaging machine and simple open packaging machine. First of all, you need to explain which kind of packaging machine you are before you can tell you how to operate

usage:
1 Check the operation manual and follow the correct instructions to make preparations before startup
2. The powder packaging machine shall be placed stably to check whether all parts are loose and whether the startup temperature rise is normal
3. Select the required heating temperature according to the packaging bag material and adjust the heating temperature to the corresponding value
4. The packaging speed and bag making length are digitally set by the packaging machine controller
5. The heat seal body adopts four-way heating control. The heat seal temperature can be preset and automatically controlled to ensure good heat balance, so as to ensure tight sealing of the bag opening,
flat and beautiful
6 Automatically print the batch number or production date of packaged products. (Note: conventional products are hot embossing. If ribbon printing is required, special orders can be made and ribbon type
Hot printer can be installed.)
7. A cut and tear opening can be added on each bag of packaged products, which is convenient for consumers to use
8. The display screen of the packaging machine controller can visually display the packaging speed and production volume when the machine is running
9. The cutter position can be adjusted at will during the operation of the machine. The sealing and cutting position is accurate, the incision is neat and there is no stacking.

1. Check the operation manual and follow the correct instructions to make preparations before startup

2. The powder packaging machine shall be placed stably to check whether all parts are loose and whether the startup temperature rise is normal

3. Select the required heating temperature according to the packaging bag material and adjust the heating temperature to the corresponding value

4. The packaging speed and bag making length are digitally set by the packaging machine controller

5. The heat seal body adopts four-way heating control. The heat seal temperature can be preset and automatically controlled to ensure good heat balance, so as to ensure tight sealing of the bag opening,

flat and beautiful

6 Automatically print the batch number or production date of packaged products. (Note: conventional products are hot embossing. If ribbon printing is required, special orders can be made and ribbon type

Hot printer can be installed.)

7. A cut and tear opening can be added on each bag of packaged products, which is convenient for consumers to use

8. The display screen of the packaging machine controller can visually display the packaging speed and production volume when the machine is running

9. The cutter position can be adjusted at will during the operation of the machine. The sealing and cutting position is accurate, the incision is neat and there is no stacking.

You may also like

Leave a Comment