Home xin How to install the packing rope of the strapping machine?

How to install the packing rope of the strapping machine?

by admin
0 comment

there will be corresponding rope positions at the lower mouth of the equipment. When it needs to be moved, string the packing rope through the automatic elastic device behind the packer and place it along the packing belt groove. Then bind the packing belt to the pull stop at the bottom end of the packing groove, rotate the automatic elastic device 90 degrees, close the bottom door and lock it

when packaging general objects, sd-005 /h can be selected, and the table height can be adjusted by 750-820mm. When the packaging is large and heavy, sd-007 /L (low table type) can be used first, and the table height can be adjusted by 340-490mm

to change the low platform type into the high platform type, just move and install the reel support at the bottom of the chassis and replace the four long leg tubes. When there are irregularities on the ground of the workplace, the four leg support frame of the strapping machine can be fine tuned to keep the machine level

extended data:

design features

1. Integrated circuit design: new circuit design. The packer adopts plug-in circuit board to control the whole packaging action and hot head temperature. The circuit board replacement is quite convenient and the packer service is convenient

2. Instant heating and immediate packaging: innovate the design of high-speed hot melt system, which can make the heating sheet work within 5 seconds and make the pet packer enter the best packaging state

3. Automatic shutdown device, power saving and practical: when the baling action is completed and no operation is carried out within 60 seconds, the baling machine has a compact structure design, and the motor will automatically stop and enter the standby state

4. New brake design: the packer uses the brake with disc and adopts special spring design to ensure smooth belt entry without noise, and the price of the packer is reasonable

there will be corresponding rope positions at the lower mouth of the packer equipment, which can be used when it needs to be moved. You can see that it should not be difficult to find. This kind of equipment can be used. String the packing rope through the automatic elastic device behind the packer and place it along the packing belt groove. Then bind the packing belt to the pull at the bottom end of the packing groove, rotate the automatic elastic device 90 degrees, close the bottom door and lock it.

You may also like

Leave a Comment